Balance Cage Guided Shut-Off Valve, GB/T4213-2008 Standards

Model Number: HCPKC-#7884 Brand Name: HCPKC Key Specifications/Special Features: Balance cage guided shut-off valveHCPKC balance cage guided shut-off valve is a kind of improved pressure balanced control valve which is applicable for controlling high or low temperature and high pressure liquidThe high-performance seal ring is used on the valve plug or cageThe valve with a compactstructure, S type flow way and a guide wing that improved the fluid balance around the cage makes the low pressure loss, large flow, wide adjustable range and high-precision flow characteristic are availableThe design of valve is in compliance with IEC534-2-1976This valve represents dynamic stability, low noise and small cavitation corrosionIt is applicable for two-position type of control or the occasion where required immediately shut offWhen two-positionthree-way solenoid valve or quick exhaust valve is equipped with, the quick shut off action can be available and the medium in the pipeline can be quickly cut off or safely drained offThe leakage complies with the ANSI B16.104 standardsThe compact size and large output force can be available when the control valve is combined with multi-spring diaphragm actuator or cylinder actuator
This product complies with the GB/T4213-2008 standards
Standard specification
Body
Type: straight-through, single seated, cast globe valve
Normal size: 40, 50, 65, 80, 100mm
Pressure rating: ANSI class 125, 150, 300, 600; JIS 10K, 20K, 30K,40K; PN 1.6, 4.0, 6.4MPa
End connections:
Flanged: FF, RF, RJ, TG, MFM welded
End: SW (40-50mm); BW (65-100mm)
Body & bonnet material: SCPH2/WCB, SCPH21/WC6,SCS13A/CF8,SCS14A/CF8M,
SCS16A/CF3M, Ti and other alloy steels
Bonnet type: (P) plain type: -17-230°C
(EI) extension type I：＋230-566°C (EII) extension type II：-100-45°C
Note: take care not to exceed the operating temperature ranges specified for required materials
Gland type: bolted gland
Packing: Teflon V-ring, grafoil
Gasket: flat type, saw-tooth type (carbon steel, stainless steel or other alloy steels)
Surface coating: SLV (epoxy resin group) is standard
In the case of stainless steel body, no painting is standard
Standard: JIS B2201-1984, JB/T79.1-94(PN1.6MPa);JB/T79.2-94(PN4.0, 6.4MPa); ANSI B16.5-2009;HG20592-2009, HG20615-2009